Getting Started
34
Cubis
®
MCE Operating Instructions
6
Getting Started
6.1
Connecting Electronic Components
Procedure
NOTICE Improper connection may damage the device! If the device is connected
t
using electronic components, e .g . printer, PC: The device must be disconnected
from the power supply . Ensure that the device is disconnected from the power
supply .
Connect the device using electronic components (see electronic components
t
instructions) .
6.2
Installing the AC Adapter
Procedure
If this relates to a device without an electronics module: Plug the DC supply
t
cable of the AC adapter into the device's "power supply" connection socket and
tighten the threaded fitting .
If this relates to a device with an electronics module: Plug the DC supply cable of
t
the AC adapter into the electronics module's "power supply" connection socket
and tighten the threaded fitting .
Connect the power supply cable to the AC adapter connection .
t