Table of Contents
Advertisement
ACTIVE WTV: Machine configuration
1.10. TROUBLESHOOTING SERVICE MENU FOR 700 AND 900
MODELS
The machine configuration procedure is invoked, when the machine is in standby mode, by pressing
the top right hand, the bottom left hand and the bottom right hand corner in sequence, as shown in
the picture below.
The machine display will shows a window from where you can access the different configuration
menus, using the proper password.
To access the menu, type in the password 2411 and press ENTER key to confirm or BACK key to
back forward.
At this point the machine display will shows the different parameters of the menu. To exit the
TROUBLESHOOTING menu press HOME key.
Here below have been detailed all the parameters of the menu.
Page 30
Advertisement
Table of Contents
