Table of Contents
Advertisement
AT drivers for European and US market, use the same SW, nevertheless the first
character among the three which identify the SW version, changes according to the HW
mounted on the machine. In particular you can find:
• 2.x.x if the AT driver on the machine is that for European market.
• 4.x.x if the AT driver on the machine is that for US market.
Press HOME to confirm and save, FORWARD or BACK to scroll the pages.
1.2.6.
M
AINS VOLTAGE
This function allows the user to choose the proper power supply voltage for the machine. To change
the selection, select the desired option among the ones in the list, directly touching on the Touch
Screen.
Choosing "No set" value, each time the machine is switched on it is necessary to insert the power
supply voltage provided by the electrical mains line.
1.2.7.
S
TANDARD SETTINGS
This function clears the operating data of the machine and simultaneously resets the User menu, low
kit, UpDown table parameters to their default values. To launch the values restore press
STANDARD SETTINGS key
This function does not alter the language and the TV standard setting.
1.2.8.
R
/W
EAD
RITE REGISTERS
This function allows to display/modify the parameter values of type b, C, D, F, P, H and S. To
access this menu.
To correctly display the parameter values, you need to load them from the low kit, using
the "Read from low kit" function.
In addition to the machine usage data, this function also includes the 2 sub-functions described
below:
1.2.8.1.
Read from low kit
To read the parameter values from the low kit memory and view them on the display, press READ
FROM LOW KIT key.
1.2.8.2.
Write to low kit
To write the values of the currently displayed parameters to the low kit, press WRITE TO LOW
KIT key.
Page 14
No set
100 VAC
120 VAC
230 VAC
ACTIVE WTV: Machine configuration
Advertisement
Table of Contents
