Automatic Radio Channel Tuning Procedure - Technogym ACTIVE Wellness TV RUN EXCITE Machine Configuration

ACTIVE WTV: Machine configuration
To tune and memorise a channel, proceed as follow:
1.7.1.1.

Automatic radio channel tuning procedure

1. Press the AUTOMATIC SEARCH button to start automatic
scanning of the FM radio band (88 – 108 MHz). During this stage, the
channels found will be collected in a temporary listing and visualized
in the first column on the left side of the one with the channel
numbers.
2. Wait for the automatic search to finish, or interrupt it by pressing the
STOP SEARCH key.
3. Using the + and – buttons below the frequency column, it is possible
to scroll the frequency pages and using the + and – buttons below the
channel numbers column, it is possible to scroll the pages of the 16
channels which can be memorised.
4. Once you have found a channel to memorise, select it in the first
column, then press the number that you want to associate it with, in
the second column.
If a channel has already been memorised under that
number, the old channel will be overwritten with the new
one.
5. Repeat the above steps for each desired channel.
6. Press the "SAVE IN EEPROM" key to permanently save the
configuration.
7. Exit with the "HOME" key.
Page 25