Table of Contents
Advertisement
To tune and memorise a channel, proceed as follow:
Page 22
1. Select the correct television standard for the country of installation,
choosing between all the available options, using the + and – keys in
the proper menu.
2. Press the AUTOMATIC SEARCH button to start automatic
scanning of the video bands. During this stage, the channels found
will be collected in a temporary listing and visualized in the first
column on the left side of the one with the channel numbers.
3. Wait for the automatic search to finish, or interrupt it by pressing the
STOP SEARCH key.
4. Using the + and – buttons below the frequency column, it is possible
to scroll the frequency pages and using the + and – buttons below the
channel numbers column, it is possible to scroll the pages of the 39
channels which can be memorised.
5. Once you have found a channel to memorise, select it in the first
column, then press the number that you want to associate it with, in
the second column.
If a channel has already been memorised under that
number, the old channel will be overwritten with the new
one.
6. An alphanumeric keypad is displayed, to associate a name to the
memorised channel (12 characters max).
7. Press the ENTER (↵) key: the keypad will disappear and the name
will be displayed next to the numbere.
8. Repeat the above steps for each desired channel.
9. Press the "SAVE IN EEPROM" key to permanently save the
configuration.
10. Exit with the "HOME" key.
ACTIVE WTV: Machine configuration
Advertisement
Table of Contents
