Operating Data; Read From Low Kit; Write To Low Kit - Technogym ACTIVE Wellness TV RUN EXCITE Machine Configuration

Parameter Description
Par 09 DC motor encoder error timeout. [msec]
Par 10 FREE
Par 11 Driving roller diameter. [mm]
Par 12 Pulley ratio
Par 13 Error status on AC motor encoder
To change the setting, press the CHANGE key and insert the value using the numeric keyboard.
Press ENTER key to confirm or BACK key to back forward.
After any changes to the parameter values, you need to load them in the low kit using
the "Write to low kit" function.
Press HOME to confirm and save, FORWARD or BACK to scroll the pages.
1.2.2. O
PERATING DATA
This function makes it possible to access the machine usage data stored in the low kit.
In addition to the machine usage data, this function also includes the 2 sub-functions described
below:
1.2.2.1.

Read from low kit

To read the parameter values from the low kit memory and view them on the display, press READ
FROM LOW KIT key.
1.2.2.2.

Write to low kit

To write the values of the currently displayed parameters to the low kit, press WRITE TO LOW
KIT key.
The machine usage data on the display is updated every 10 minutes. This means that, whenever the
machine is switched off, any data modified after the last memory update will be lost.
To correctly display the parameter values, you need to load them from the low kit, using
the "Read from low kit" function.
Page 10
ACTIVE WTV: Machine configuration
Range Default value
0 - 255 15
- 0
0 - 1000 91
0 - 9000 200
0 - 1 0