Transferring The Tuning Data; Using The Tgs; Using The Connecting Cable - Technogym ACTIVE Wellness TV RUN EXCITE Machine Configuration

ACTIVE WTV: Machine configuration

1.8. TRANSFERRING THE TUNING DATA

The TV and radio channel tuning data can be transferred from one machine to the other in 2 ways,
using a TGS key or connecting two machines using a CSafe connection.
NOTE: it is possible to use the above function only if the configuration has been
permanently saved in EEPROM.
1.8.1. U
SING THE
1.8.2. U
SING THE CONNECTING CABLE
TGS
On the already tuned machine:
1. Enter the configuration menu of the channels that are to be transferred.
2. Insert the TGS key into the reader on the machine;
3. Press the "SAVE IN TGS" button, this will cause all the channel
configuration data to be saved to the key.
4. Exit the menu by pressing the "HOME" key.
On the machine to be tuned:
1. Enter the configuration menu of the channels that need to be tuned.
2. Insert the TGS key to which the tuning data was saved.
3. Press the "READ TGS" button.
4. Save the data uploaded to the machine by pressing "SAVE IN
EEPROM".
5. Exit the menu by pressing the "HOME" key.
1. Connect the two machines together using the proper cable.
2. On both machines, enter the configuration menu of the channels that
need to be tuned.
3. Press the "SAVE IN TGS" button on the already tuned machine.
4. Store the data transferred on the machine being tuned by pressing
"SAVE IN EEPROM".
5. Exit the menu on both machines by pressing "HOME".
Page 27