I-View Anycam IR-3MIPS08 Series Manual page 56

example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5
seconds, the IP Camera records until 11:00:05.
 Overwrite: If you enable his function and the HDD is full, the new record files overwrite the
oldest record files automatically.
 Keep days: If you enable his function and the HDD is full, the new record files will be stop
save into the HDD when the storage days over your setup volume of Keep days.
Make sure the size of storage media allow to save video clips which setup volume of "Keep
days" mode.

Record path: Select the recording media via FTP server or SD card.
To configure record settings, please make sure that you have the network storage device within the
network or the SD card inserted in your IP camera.
 "FTP server": Setup the recording path via FTP server mode. The detail information of FTP
server, maybe need to ask the MSI people.
 "SD Card ": Setup the recording path on SD Card.
You need to format the SD card from the IP camera before you used.
56