I-View Anycam IR-3MIPS08 Series Manual page 32

1. Listen: Click this icon to listen the audio from IP camera when Microphone had installed.
2. Information: it will show the information of IP camera such as resolution, bit rate and frame rate.
3. Talk: Click this icon to talk to IP camera when Speaker with audio Amplifier had installed.
4. Photo: Click this icon to take a photo from IP camera. The default path is C:\WebData\snapshot.
5. Rec.: Click this icon to start recording the video clips from IP camera; click again will stop
recording. The default path is C:\WebData\record.
6. Screen: Display video of IP camera on the screen.
7. Screen: Choice the video streaming on the screen.
8. View: Click this icon to display the video of IP camera.
9. Play Mode: Click this icon to choice the display speed or video quality will be priority first.
10. Setup: Click this icon to setup the parameters of IP camera.
11. Pan/Tilt/Zoom button: Move the Pan/Tilt/Zoom position of IP Speed dome camera, this function just
effect for the IP PTZ camera and Motorized Lens only and the detail description of IP PTZ camera that
you can refer to the Operation of FDMO-2MIP-20X/30X IR PTZ camera. As for the Motorized Lens,
the description functions as below.
32