I-View Anycam IR-3MIPS08 Series Manual page 48

Operation menu
Hide thumbs Also See for Anycam IR-3MIPS08 Series:
Table of Contents

Advertisement

Basic setup: Adjust the video parameters such as Brightness, Saturation, Sharpness and mirror
function. .If you turn the Mirror function on, the image will be flipped. It is like the image in the
mirror. The flip direction can be set to off, horizontal and vertical mirror position.
Noise reduction: The noise reduction function processes the noise between two frames besides
processing the noise in one frame. The noise will be much less and the video will be clearer
Choice the volume of noise reduction level high will show less noise but the image become fuzzy.
Mirror: To adjust the image position without changing the camera location.
Advance d setup
Exposure: Provides auto and fixed mode, the max value of shutter needs to be adjusted manually.
Allow be used in underexposure condition. It lengthens the shutter time to ensure full exposure.
Gain: Provides auto and fixed mode, the value of gain needs to be adjusted manually.
White balance: There are some scene modes to difference environments, such as Auto, Cloudy,
Sunny, Tungsten and Fluorescent mode.
WDR: Allow to enable /disable WDR function.
Flickless: Set the Video Standard to 50Hz(PAL) or 60Hz(NTSC) according to the video system
in your country, Wrong frequency will show the scrolling lines on the video.
IRIS: Provides auto and fixed mode, the value of iris speed needs to be adjusted manually.
Sensitivity: Choice " Higher" mode turn into the B/W at high Illumination. Click Save icon to
save the setting.
OSD: Allow to paste text (Device name) and time stamp on the video.
Basic setup: You can choice the font size and transparency for the text (Device name) and time
stamp which you want to show on the video of IP camera.
System setup: Allow enable/disable the "Device name" and "Time stamp" to paste on video; and
you also can setup the display position. The left/top is original position of X/Y axis.
Allow user to define the time format and paste text position. The " Device name" default is
disable and you need to check this icon to show the camera name on the Image.
48

Advertisement

Table of Contents
loading

Table of Contents