I-View Anycam IR-3MIPS08 Series Manual page 37

Follow the steps below to acquire your Network Camera's public IP address.
1. Set up the Network Camera on the LAN.
2. Go to Home > Configuration > Application > Server Settings to add a new email or FTP server.
3. Go to Configuration > Application > Media Settings.
receive the system log in TXT file format which contains the Network Camera's public IP
address in your email or on the FTP server.
4. Select PPPoE and enter the user name and password provided by your ISP.
5. Click Save to enable the setting and then the Network Camera will reboot.
6. Disconnect the power to the Network Camera; remove it from the LAN environment.
 Port Settings: If there is a router and you want to access the speed dome through Wide Area
Network (WAN), you need to forward the 3 ports for the IP Camera. Click this button to modify
the HTTP (Default is 80), RTSP (Default is 554) or Control Port number (Default is 60000), Http
streaming port (Default is 8080) and SSH (Default is 72) and click Save to change the setting.

Date & Time: Click this button to setup the time of IP camera. The detail process description as
below:
Select System log so that you will
37