I-View Anycam IR-3MIPS08 Series Manual page 35


Device Management: Click this button to setup the parameters of IP camera and the detail
description as below:
 IP Setting: Click this button to modify the current Internet protocol with IPv4 or IPv6, IP address,
enable/disable DHCP and DNS IP address.
Get IP address automatically: Select this option to obtain an available dynamic IP address
assigned by the DHCP server each time the camera is connected to the LAN.
Use fixed IP address: Select this option to manually assign a static IP address to the Network
Camera.
1. You can make use of Search IP tools on the software CD to easily set up the Network Camera
on LAN. Please refer to Quick user guide for details.
2. Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP Subnet
mask: This is used to determine if the destination is in the same subnet The default value is
"255.255.255.0".
3. Configure the NIC settings, including the IPv4 (IPv6) Address, IPv4(IPv6) Subnet Mask and
IPv4(IPv6) Default Gateway.
4. Click Save to change the setting.
Preferred DNS: The primary domain name server that translates hostnames into IP addresses
Alternate DNS: Secondary domain name server that backups the Primary DNS
35