I-View Anycam IR-3MIPS08 Series Manual page 59


Protocol: The IP camera support the Onvif protocol and you will find out the version.

Maintenance: Click this button to
update the firmware, restore the
default setting and check the view
log ...etc. Please refer the detail
process as below:

Reboot: There are 2 choices to reboot the IP Camera; one is menu, the other by schedule setting.

Click the "Reboot" icon and the IP camera will reboot, this process will take 1-2 minutes.

Enable the "Auto reboot" icon, you can setup the reboot schedule to reboot the IP camera at a
specific time. The schedule can be every day or one day per week. As this process that will
keep on the IP camera at the optimum status.
59