I-View Anycam IR-3MIPS08 Series Manual page 53


Alarm Trigger: You can setup the image motion trigger and sensor alarm trigger from this section.
The detail process show as below:

Motion alarm: Enable Motion detection function and you can setup the trigger schedule and
detection area. You can select the region area number then adjust the " Sensitivity" and
" Threshold" level for individual region, and click and drag the left button of Mouse to setup the
detection area. You can specify the notify method (Such as Trigger alarm output, move PTZ
camera position, notify via email, send the snapshot to FTP ) when an event occurs.
53