Setting Ip Camera For Witness Pro Nvr Software - I-View Anycam IR-3MIPS08 Series Manual

3-3. Setting IP camera for Witness Pro NVR software

When you first time run the Witness Pro NVR program and there is no IP camera setting on the
system, so the NVR will pop up the "ezSetup " program for the IP cameras configuration. This setup
window may differ greatly depending on your NVR model.
1. Setup the parameters of IP cameras
 Search IP camera: Click this icon will auto search IP cameras of I-View brand. You can refer to
the Fig A diagram. Move the Mouse and click to the IP camera which you want to selected and
double click that the detail information will show the right site; you can do the change the setting
Fig A
Fig C
Fig B
21