Design Of A Controller - Danfoss ADAP-KOOL AK-PC 781 Design Manual

2. Design of a controller

This section describes how the controller is designed.
The controller in the system is based on a uniform connection
platform where any deviations from regulation to regulation is
determined by the used top part with a specific software and
by which input and output signals the relevant application will
require. If it is an application with few connections, the controller
module (top part with belonging bottom part) may be sufficient.
If it is an application with many connections it will be necessary to
use the controller module plus one or more extension modules.
This section will give you a survey of possible connections plus
assistance in selecting the modules required by your actual ap-
plication.
AK-PC 781 Capacity controller RS8GG602 © Danfoss 2015-03 7