Installation; Mounting The V-412.Xx6025E0 - PI PIMAG V-412.xx6025E0 Series User Manual

6 INSTALLATION

6 Installation
6.1

Mounting the V-412.xx6025E0

Overview
Figure 6: Mounting the V-412.xx6025E0 onto an underlying surface
Tools and Accessories
Screw set for mounting the V-412.xx6025E0 (p. 10)
■
■ Suitable screwdriver
Requirements
You have read and understood the
✓
You have provided a suitable surface with the holes necessary for the
✓
required, locating pins (p.
■ The flatness of the surface is ≤ 2 μm.
■ For applications with large temperature changes: The surface should have the same or
similar thermal expansion properties as the V-412.xx6025E0.
You have accounted for the space required to route cables without bending and
✓
according to regulations.
CAUTION
Risk of crushing by moving parts!
Risk of minor injuries from crushing between the moving parts of the V-412.xx6025E0 or the
load and a fixed part or obstacle.
► Use safeguards to protect limbs in areas where they could be caught by moving parts.
► Maintain the safety distances according to DIN EN ISO 13857 when installing protective
structures.
15
V412M0008EN ‒ 5/11/2020
general safety instructions (p.
31).
7).
screws and if
M O T I O N | P O S I T I O N I N G