Rescue Mode - Lenovo ThinkSystem NE10032 RackSwitch Installation Manual

Rescue Mode

86
NE10032 Installation Guide
The Rescue Mode option allows you to recover from a failed firmware or boot
image upgrade using TFTP or a USB drive.
To enter Rescue Mode, select Recovery Mode in the GRUB menu. The following
menu appears.
Entering Rescue Mode.
Please select one of the following options:
T) Configure networking and tftp download an image
U) Install image from USB stick
F) Filesystem menu
I) Select which image to boot
C) Reset configuration to factory default
Z) Reset the Network Administrator (admin) password
B) Reset the password required to enter privileged exec mode
R) Reboot
E) Exit
Option? :
The Rescue Mode menu allows you to perform the following actions:
 To recover from a failed software or boot image upgrade using TFTP, press T
and follow the screen prompts.
 To recover using an image from a USB stick, press U.
 To enter the Filesystem Menu, press F. The following menu appears:
Filesystem Options.
Please select one of the following options:
F) Run filesystem check
W) Wipe filesystem
E) Exit
To check if the switch is ready to run Cloud NOS, press F. It performs a check

to see if the filesystem is optimally partitioned and updates it accordingly.
To erase CNOS firmware images and configuration files from the switch,

press W.
To go back to the Rescue Mode menu, press E.

 To select which firmware image to boot, press I.
To reset the switch configuration to factory defaults, press C.

 To reset the Network Administrator account (admin) password, press Z.
To reset the password required to enter Privileged EXEC mode, press B.

 To restart the reload process from the beginning, press R.
To exit the Rescue Mode menu, press E.
