Operator Functions; Basic Functions; Table 3. Basic Functions - Nonin Avant 9700 Operator's Manual

Operating the Avant 9700

Operator Functions

Basic Functions

The Avant 9700 basic functions are described in the table below.
Function
Turns device on and
off
Battery capacity
View or set alarms,
volumes, time/date,
and other
parameters.
Change the LCD
display screen.
Adjust the display
intensity
(brightness).
Print-on-Demand
Table 3: Basic Functions
Button
Using the ON/STANDBY button:
• Press once (turns the device on)
• Hold 1 second (turns the device off)
• Hold 5 seconds (turns the device off when in
Patient Security mode)
Briefly press the ON/STANDBY button while the
device is on to display battery capacity.
Press the Settings button to enter the menu.
(There are two screens within the menu. The
or
then
Settings button advances the operator to the
second screen.)
• The Left and Right Control buttons advance
through limits on each screen.
• The Plus and Minus buttons adjust the
then or
highlighted limits up and down.
Press the LCD Screens button to advance
through Plethysmographic Waveform, Trend
Waveform, and Trend Histogram views.
Press the Plus or Minus button with the device in
Plethysmographic Waveform view to change
display intensity. Display intensity can also be
or
adjusted by pressing the Settings button and
advancing to the Display Brightness icon.
NOTE: When option switch 6 is in the DOWN
position, display intensity will automatically be
reduced when converting from AC to battery power.
Press the ON/STANDBY button while the device
is on.
Instruction
13