2. Click the "Import Setting" or "Export Settings" button.
Default Settings
Click the "Load Default" button to restore all system settings to the default factory settings.
4.8.2 Reboot
Go to Maintenance Reboot.
Click the "Reboot" button to reboot the device.
Timed Reboot Setting:
If desired, the camera can be set up to reboot on a time interval. Enable "Time Settings, set the day and time and then click "Save" button to save the
settings.
4.8.3 Upgrade
Go to Maintenance Upgrade. In this interface, the camera firmware can be updated.
1.
Click the "Browse" button to select the location of the firmware file.
2.
Click the "Upgrade" button to start upgrading the firmware.
3.
The device will restart automatically.
Caution! Do not close the browser or disconnect the camera from the network during the upgrade.
4.8.4 Log
To query and export log:
1.
Go to Maintenance
2.
Select the main type, sub type, start and end time.