Table of Contents
Advertisement
IP Camera User Manual
4.2.2 Video / Audio Setup
Go to Video Video/Audio Setup shown below. Resolution, frame rate,
Click the "Audio" tab to go to the interface shown below.
"Audio" tab to go to the interface shown below.
Three video streams can be adjustable.
Resolution: The size of the image.
Frame rate: The higher the frame rate, the video is smoother
Bitrate type: Options are CBR (constant) and VBR (variable)
seen in the video scene, the compression bitrate will be kept
changes. For example, for scenes that do not have much movement, the bitrate will be kept at a lower value.
For example, for scenes that do not have much movement, the bitrate will be kept at a lower value. This
bandwidth usage.
Bitrate: Can be adjusted when the mode is set to CBR. The higher the bitrate
Video Quality: Can be adjusted when the mode is set to VBR
Can be adjusted when the mode is set to VBR. The higher the image quality, more bitrate will be required.
GOP: Group of pictures. Determines how many frames are allowed between a "group of pictures"
Group of pictures. Determines how many frames are allowed between a "group of pictures". When a new scene begins in a video, until that scene
ends, the entire group of frames (or pictures) can be a considered a GOP. If there is not much movement in the scene, setting
ends, the entire group of frames (or pictures) can be a considered a GOP. If there is not much movement in the scene, setting
ends, the entire group of frames (or pictures) can be a considered a GOP. If there is not much movement in the scene, setting a GOP value higher than
the frame rate is fine, potentially resulting in less bandwidth usage. However, if the value is set too high, and there is a high frequency of movement in
the video, there is a risk of frame skipping.
Video Compression: Choose between H.264 and H.265
Profile: For H.264. Choose between baseline, main, and
Send Snapshot: How many snapshots to generate for an event.
How many snapshots to generate for an event.
Watermark: When playing back the local recorded video
and enter the watermark text.
Audio Encoding: G711A and G711U are selectable.
Audio Type: MIC and LIN are selectable.
4.2.3 OSD Configuration
Go to Video OSD interface shown below.
Set the time stamp, device name and OSD content here. After enabling the corresponding display and
position. Then click the "Save" button to save the settings.
"Save" button to save the settings.
8
esolution, frame rate, etc. can be adjusted in this section.
the video is smoother.
(variable). Bitrate is related to the image quality. CBR means that no matter how
will be kept constant. VBR means that the compression bitrate will be adjusted
The higher the bitrate, the better the image quality will be.
bandwidth usage. However, if the value is set too high, and there is a high frequency of movement in
bandwidth usage. However, if the value is set too high, and there is a high frequency of movement in
.265. If H.265 is chosen, make sure the client system is able to decode H.265.
, and high profiles.
ed video in the search interface, the watermark can be displayed. To enable it, check the watermark box
here. After enabling the corresponding display and entering the content, drag them to change their
CBR means that no matter how much change is
will be adjusted according to scene
This can help optimize the network
, more bitrate will be required.
When a new scene begins in a video, until that scene
o decode H.265.
displayed. To enable it, check the watermark box
the content, drag them to change their
Advertisement
Table of Contents
