Related Manuals for Speco O4VLD5
Summary of Contents for Speco O4VLD5
- Page 1 Quick Start Guide O4VLD5 Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
-
Page 2: Warning And Caution
Warning and Caution ■ If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. Any unauthorized changes or modifications could void the warranty. ■ Do not allow water or liquid intrusion into the camera. ■... - Page 3 4 tapping screws PA 4×35 Camera Quick start guide Drill template ×4 Plastic plug Rubber plug Screwdriver Junction box O Overvie w w vervie Mounting Base MIC in connector Ethernet connector DC power connector Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
-
Page 4: Connecting Network Cable
DC12V * 1 It is recommended to install the security cap for outdoor installations. * 2 DC 12V power supply is not required if a PoE switch or injector is used to power the camera. ► Connecting Network Cable ① Loosen the nut from the main element. ②... -
Page 5: Installation
Installation * Before you start, please make sure that the wall or ceiling is strong enough to withstand three times the weight of the camera. ① Install junction box onto the wall by using the screws provided. ② Loosen the screws to open the lower dome. Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... - Page 6 ③ Connect the cables, mount the rubber plug to the gap of the mounting base and fasten the camera onto the junction box. ④ Three-axis Adjustment-Before adjustment, preview the image of the camera on a monitor and then adjust the camera according to the figure below to get an optimum angle.
- Page 7 ⑤ Install the lower dome back to the camera and fix it with the screws. Web Operation and Login IP Scanner can search for the device on the local network. ● Operation ① Make sure that the camera and the PC are connected to the same local network.
- Page 8 ③ In the device list, you can view the IP address, model number, and MAC address of each device. Select the applicable device and double click to open up the web viewer. You can also manually enter the IP address in the address bar of the web browser. The login interface is shown above.