Table of Contents
Advertisement
IP Camera User Manual
1.
Go to the DDNS tab.
2.
Enable, save and use DDNS to log in.
4.6.4 SNMP
To get camera status, parameters and alarm information and remotely manage the camera, the SNMP function can be used. Before using SNMP, please
install an SNMP management tool and set the parameters of SNMP, such as SNMP port, trap address.
1.
Go to the SNMP tab.
2.
Check the corresponding version checkbox (Enable SNMPv1, Enable SNMPv2, Enable SNMPv3) according to the version of the SNMP software
that will be used.
3.
Set the values for "Read SNMP Community", "Write SNMP Community", "Trap Address", "Trap Port" and so on. Please make sure the settings
are the same as that of the SNMP software.
19
Advertisement
Table of Contents
