Reboot; Upgrade; Operation Log - Speco O4D6 User Manual

Import & Export Settings

Configuration settings of the camera can be exported form a camera into another camera.
1. Click "Browse" to select the save path for import or export information on the PC.
2. Click the "Import Setting" or "Export Setting" button.
Default Settings

Click the "Load Default" button to restore all system settings to the default factory settings except those you want to keep.

4.7.2 Reboot

Go toMaintenanceReboot.
Click the "Reboot" button to reboot the device.
Timed Reboot Setting:
If necessary, the camera can be set up to reboot on a time interval. Enable "Time Settings", set the date and time and then click the
"Save" button to save the settings.

4.7.3 Upgrade

Go toMaintenanceUpgrade. In this interface, the camera firmware can be updated.
1. Click the "Browse" button to select the save path of the upgrade file
2. Click the "Upgrade" button to start upgrading the firmware.
3. The device will restart automatically
Caution!Do not close the browser or disconnect the camera from the network during the upgrade.

4.7.4 Operation Log

To query and export log:
1. Go toMaintenanceOperation Log.
37