Running Log Settings
⚫
After enabling it, select the log level and file size and click "Save". Then the system will collect logs accordingly. When the device
error occurs, you can export these logs and send them to the technician to find out the problem.
Log Level: it is recommended to select "INFO" or "Debug".
Default Settings
⚫
Click the "Load Default" button and then verify the password to restore all system settings to the default factory settings except
those you want to keep.
4.7.2 Reboot
Go to Maintenance→Reboot.
Click the "Reboot" button to reboot the device.
Timed Reboot Setting:
If necessary, the camera can be set up to reboot on a time interval. Enable "Time Settings", set the date and time and then click the
"Save" button to save the settings.
4.7.3 Upgrade
Go to Maintenance→Upgrade. In this interface, the camera firmware can be updated.
1. Click the "Browse" button to select the save path of the upgrade file
2. Click the "Upgrade" button to start upgrading the firmware.
3. The device will restart automatically
Caution! Do not close the browser or disconnect the camera from the network during the upgrade.
4.7.4 Operation Log
To query and export log:
1. Go to Maintenance→Operation Log.
2. Select the main type, sub type, start and end time.
3. Click "Search" to view the operation log.
4. Click "Export" to export the operation log.
39