Table of Contents
Advertisement
4.5.4 DDNS
If the camera is set up with a DHCP connection, DDNS should be set for accessing the camera from the internet.
1. Go to Network→ DDNS.
2. Enable, save and use DDNS to log in.
4.5.5 SNMP
To get camera status, parameters and alarm information and remotely manage the camera, the SNMP function can be used. Before
using SNMP, please install an SNMP management tool and set the parameters of the SNMP, such as SNMP port, trap address.
1. Go to Network→SNMP.
29
Advertisement
Table of Contents
