Video / Audio Configuration - Speco O4BDD2M User Manual

Frequency: 50Hz and 60Hz can be optional.
Corridor Pattern: Corridor viewing modes can be used for situations such as long hallways. 0, 90, 180 and 270 are available. The
default value is 0. The video resolution should be 1080P or below if this function is used.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.
Illumination Mode: choose "White light", "Infrared light" or "Smart supplement light" as needed.
Smart supplement light: If selected, in low ambient light, the system will automatically turn on the IR light or white light. Once there
are people or vehicles appearing in the detection area, it will automatically switch to white light. When no people or vehicles are
detected, it will switch to IR light.
If "White Light" is selected, "Overexposure control" and "white light mode" can be configured.
Overexposure Control: Choose "OFF", "Low", "Mid" or "High". This function can automatically adjust the exposure parameter
according to the actual effect of the image, effectively avoiding detail missing caused by image overexposure, so that the image will
be more vivid. Please set it as needed.
White Light Mode: Choose "Off", "Auto" or "Manual". Please select it as needed.
If "Infrared light" is selected, "Smart IR" and "Day/Night Mode" can be configured.
Smart IR: Choose "ON" or "OFF". This function can effectively avoid image overexposure so as to make the image more realistic. The
higher the level is, the more overexposure compensation will be given.
Day/Night Mode: Choose "Auto", "Day", "Night" or "Timing".
Schedule Settings of Image Parameters:
Click the "Profile Management" tab as shown below.
Set full time schedule for common, auto mode and specified time schedule for day and night. Choose "Timing" in the drop-down box
of schedule as shown below.
Drag " " icons to set the time of day and night. Blue means daytime and blank means night time. If the current mode of camera
parameters is set to "Timing", the image configuration mode will automatically switch between day and night according to the
schedule.

4.2.2 Video / Audio Configuration

Go to ImageVideo / Audio interfaceas shown below. In this interface, set the resolution, frame rate, bitrate type, video quality and
so on subject to the actual network condition.
12