Video / Audio Configuration - Speco O8B9M User Manual

Smart IR: Choose "ON" or "OFF". This function can effectively avoid image overexposure and underexposure by controlling the
brightness of the IR lights according to the actual conditions to make the image more realistic. Please enable it as needed.
White Balance: Adjust the color temperature according to the environment automatically.
Frequency: 50Hz and 60Hz can be optional.
Day/Night Mode: Choose "Auto", "Day", "Night" or "Timing".
Gain Mode: Choose "Auto" or "Manual". If "Auto" is selected, the gain value will be automatically adjusted according to the actual
situation. If "Manual" is selected, the gain value shall be set manually. The higher the value is, the brighter the image is.
Frequency: 50Hz and 60Hz can be optional.
Infra-red Mode: Choose "Auto", "ON" or "OFF".
Exposure Mode: Choose "Auto" or "Manual". If manual is chosen, the digital shutter speed can be adjusted.
Corridor Pattern: Corridor viewing modes can be used for situations such as long hallways. 0, 90, 180 and 270 are available. The
default value is 0. The video resolution should be 1080P or below if this function is used.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.
Schedule Settings of Image Parameters:
Click the "Profile Management" tab as shown below.
Set full time schedule for common, day or night mode and specified time schedule for day and night. Choose "Timing" in the
drop-down box of schedule as shown below.
Drag " " icons to set the time of day and night. Blue means daytime and blank means night time. If the current mode of camera
parameters is set to "Timing", the image configuration mode will automatically switch between day and night according to the
schedule.

4.2.2 Video / Audio Configuration

Go to ImageVideo / Audio interface as shown below. In this interface, set the resolution, frame rate, bitrate type, video quality
and so on subject to the actual network condition.
12