Table of Contents
Advertisement
60Hz: reduces flicker in 60Hz lighting conditions.
⚫
Smart IR: Choose "ON" or "OFF". This function can effectively avoid image overexposure and underexposure by controlling the
brightness of the IR lights according to the actual conditions to make the image more realistic. Please enable it as needed.
White Balance: Adjust the color temperature according to the environment automatically.
Day/Night Mode: Choose "Auto", "Day", "Night" or "Timing".
Shutter Mode: Choose "Auto" or "Manual". If manual is chosen, the digital shutter speed can be adjusted.
Gain Mode: Choose "Auto" or "Manual". If "Auto" is selected, the gain value will be automatically adjusted according to the actual
situation. If "Manual" is selected, the gain value shall be set manually. The higher the value is, the brighter the image is.
Frequency: 50Hz and 60Hz can be optional.
Infra-red Mode: Choose "Auto", "ON" or "OFF".
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.
Schedule Settings of Image Parameters:
Click the "Profile Management" tab as shown below.
Set full time schedule for common, auto mode and specified time schedule for day and night. Choose "Timing" in the drop-down box
of schedule as shown below.
Drag " " icons to set the time of day and night. Blue means day time and blank means night time. If the current mode of camera
parameters is set to "Timing", the image configuration mode will automatically switch between day and night according to the
schedule.
4.2.2 Video / Audio Configuration
Go to Image→Video / Audio interface as shown below. In this interface, set the resolution, frame rate, bitrate type, video quality
and so on subject to the actual network condition.
12
Advertisement
Table of Contents
