Chapter 3 How to Use the Operator Panel
3.1 Operator Panel Overview
The operator panel consists of buttons and LED indicators.
Names and Functions
*1: For details about the setup method for a scan using the [Scan/Stop] button, refer to the scanner driver's Help or
Scanning" (page
35).
Check Indicator
Lights up or flashes in orange when an error occurs.
Check
Power Indicator
Lights up in green when the scanner is turned on.
Scan
Flashes when there is an error with the device.
/Stop
Power
[Scan/Stop] Button (*1)
Launches the linked application software.
Clears the displayed error indication.
Cancels a scan while scanning by pressing this button.
[Power] Button
Turns the power on/off.
"Using a Button on the Scanner to Start
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
28