Fujitsu FI-400F Operator's Manual page 73

Chapter 7 Operational Settings
Item
Page Edge Filler (FB)
(page 76)
Dropout color
(page 77)
Power SW Control
(page 80)
Description
Specify the width for the margin around the
scanned image to be filled in with black.
This setting can also be configured in the
scanner driver. In that case, Page Edge Filler of
the scanner driver is used on the output image.
Select a color to be removed from the scanned
image (only available in black & white or
grayscale mode).
This setting can also be configured in the
scanner driver. Note that priority is given to the
scanner driver setting.
Specify the method by which the scanner is
powered on/off.
Parameter/Value
Top/Bottom/Left/Right: 0 to 15 mm
(A: image, B: filled area, A+B: output)
Red/Green/Blue/None
Enable power switch/Disable power switch
TOP
Contents
Factory Default
Index
Top/Bottom/Left/
Introduction
Right: 0 mm
Scanner
Overview
How to Scan
Documents
Green
How to Use the
Operator Panel
Various Ways to
Scan
Enable power
switch
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
73