Scanning Takes A Long Time; Appendix - Fujitsu FI-400F Operator's Manual

Chapter 6 Troubleshooting

Scanning takes a long time.

Does your computer meet the recommended
requirements?
Yes
Is the USB cable connected to the USB 1.1 port?
No
Did you start a scan while the computer was unstable (for
example, immediately after computer start-up or logon)?
No
Use a computer that meets the recommended CPU, memory, and other
requirements.
No
For details, refer to "Operating Environment" (page
You can check the type of the USB port that the USB cable is connected to by
selecting [Interface]  [Currently connected interface] in [Device Info] of the
Yes
Software Operation Panel.
Connect the USB cable to the USB 2.0 port.
When you start or log onto the computer, wait a while before starting a scan.
Yes
If the problem persists, check the items in
Service Provider" (page 58)
authorized FUJITSU scanner service provider.
21).
"6.3 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings

Appendix

Glossary
49