Fujitsu FI-400F Operator's Manual page 78

Chapter 7 Operational Settings
1
Start up the Software Operation Panel.
For details, refer to "7.1 Starting Up the Software Operation Panel"
(page 62).
2
From the listing on the left, select [Device Setting 2] 
[Dropout color].
3
Select a color to drop out.
Red, Green, Blue: The selected color is dropped out.
None: No color is dropped out.
ATTENTION
The Software Operation Panel allows you to choose the color from
red, green, and blue only. To drop out a color of your choice,
configure the setting in the scanner driver.
For details, refer to the scanner driver's Help.
HINT
This setting can also be configured in the scanner driver. Note that
priority is given to the scanner driver setting.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
78