Quality Of Scanned Text Or Lines Is Unsatisfactory; Index - Fujitsu FI-400F Operator's Manual

Chapter 6 Troubleshooting

Quality of scanned text or lines is unsatisfactory.

Are the document pad and document bed clean?
Yes
Is the resolution appropriate?
Yes
Did you configure the settings in the scanner driver to scan
in grayscale or color mode?
No
Is there any foreign matter (such as dust or paper dust) on
the document?
No
*1: When you scan in grayscale or color mode, scanned images with text or lines may not become sharp or clear.
Perform cleaning.
For details, refer to "Chapter 5 Daily Care" (page
No
Specify a higher resolution in the scanner driver.
No
Configure the settings in the scanner driver to scan in black & white mode. (*1)
Yes
Remove any foreign matter off the document.
It may be carried onto the document bed, and cause the image to become dirty.
Yes
If the problem persists, check the items in
Service Provider" (page 58)
authorized FUJITSU scanner service provider.
37).
"6.3 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents

Index

Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Appendix
Glossary
51