Basic Specification - Fujitsu FI-400F Operator's Manual

Appendix
A.1 Basic Specification
Item
Scanner type
Image sensor
Light source
Scanning area Maximum
Scanning speed Binary (black & white)
(*1)
Grayscale
Color
Optical resolution
Output resolution Binary (black & white)
Grayscale
Color
Grayscale level
Interface
*1: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*2: Use the USB cable supplied with the scanner.
When connecting the cable to a USB hub, make sure that the USB hub is connected to a USB port of the computer.
Connection with USB 2.0 requires the USB port and the hub to support USB 2.0. Also note that the scanning speed slows down when USB 1.1 is used.
Connect the USB cable with the USB mark facing upward.
Specification
Flatbed
Color CCD
White LED
216 × 297 mm/8.5 × 11.69 in.
1.7 seconds
600 dpi
50 to 600 dpi, 1200 dpi
8-bit for each color
USB 2.0/1.1 (*2)
Notes
-
-
-
-
300 dpi, A4
-
50 to 600 dpi: configurable in 1 dpi increments
1200 dpi: created by the scanner driver
10-bit during internal processing
Type B
TOP
Contents
Index
Introduction
Scanner
Overview
How to Scan
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational Operational
Settings Settings
Appendix
Glossary
82