Logging Into The Switch - Lenovo ThinkSystem NE1032 Installation Manual

Logging Into the Switch

74
NE1032 Installation Guide
When the switch starts, it performs initial self tests, and then prompts for the login.
For example:
********* Booting Lenovo CNOS image 1 *********
4019996 bytes read in 338 ms (11.3 MiB/s)
30611 bytes read in 139 ms (214.8 KiB/s)
********* Booting active image 1 *********
Booting OS
Starting udev
INIT: version 2.88 booting
INIT: version 2.88 booting
mknod /dev/blade-irq c 249 0 - OK
...
Poky (Yocto Project Reference Distro) 2.1.2 NE1032 /dev/ttyS0
NE1032 login:
At the prompt, type the switch username and password and press Enter. The
default username is admin and the default password is admin.
Note: If the switch has already started prior to your connection, you may need to
press Enter to display the password prompt.
After successfully logging into the switch, the following CLI prompt will be
displayed:
NOS version 10.4.2.0 LENOVO NE1032, Thu Feb
NE1032>
9 16:09:11 PST 2017