Lenovo ThinkSystem NE1032 Installation Manual page 46

5. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws (Item
6. If installing the 1U air-duct option, see the instruction on
7. Connect all external cables in accordance with the
8. Initialize the switch. See
9. If the switch is a replacement unit, set Vital Product Data (see
46
NE1032 Installation Guide
3), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/- 0.1 Nm (50
inch-pounds).
4
3
page 36.
Product Data" on page
7
Chapter 5, "Initializing the
69).
page 47.
"Cabling Guidelines" on
NE1032".
"Configuring Vital