Lenovo ThinkSystem NE1032 Installation Manual page 49

3. Secure the air-duct mounting bracket to the rails with M6 screws. Torque the
screws to approximately 5.7 Nm ± 0.1 Nm (50 inch-pounds).
4. Secure the air-duct mounting bracket to the rack chassis with M3.5 screws. Torque
the screws to approximately 1.1 Nm ± 0.1 Nm (10 inch-pounds).
5. Plug the power cords into their respective NE1032 power connectors and using tie
wraps, secure the power cords to the mounting rails.
© Copyright Lenovo 2018
Note: Reuse the original M6 screws used to fasten the 4-post rack mounting
brackets to secure the air duct mounting brackets with 4-post mounting brackets
together.
Power connection
Air duct mounting bracket
M3.5 screws
Power connection
Tie wraps
Chapter 3: Installing NE1032 Hardware and Options
M6 screws
Tie wraps
49