Table of Contents
Advertisement
Logging Into the Switch
© Copyright Lenovo 2019
For details on how to connect to the switch, see
page
26.
When the switch starts, it performs initial self tests, and then prompts for the login.
For example:
********* Booting Lenovo CNOS image 1 *********
4019996 bytes read in 338 ms (11.3 MiB/s)
30611 bytes read in 139 ms (214.8 KiB/s)
********* Booting active image 1 *********
Booting OS
Starting udev
Starting DHCP server:
...
NE1072T login:
At the prompt, type the switch username and password and press Enter. The
default username is admin and the default password is admin.
Notes:If the switch has already started prior to your connection, you may need to
press Enter to display the password prompt.
After successfully logging into the switch, the following CLI prompt is displayed:
NOS 10.8.5.0 Lenovo ThinkSystem NE1072T RackSwitch, Oct 23 01:27:54 2018
NE1072T>
"Connecting to the Switch" on
Chapter 5: Initializing the NE1072T
77
Advertisement
Table of Contents
