Lexmark C2132 User Manual page 82

Understanding the printer menus
Reports menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > Reports
•
Network/Ports > Network [x] > Network [x] Setup > Reports
Use To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP
address.
Network Card menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > Network Card
•
Network/Ports > Network [x] > Network [x] Setup > Network Card
Use
View Card Status
Connected
Disconnected
View Card Speed
Energy Efficient Ethernet
Enable
Disable
Network Address
UAA
LAA
Job Timeout
0, 10–225 seconds
Banner Page
Off
On
TCP/IP menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > TCP/IP
•
Network/Ports > Network [x] > Network [x] Setup > TCP/IP
Note: This menu is available only in network printers or printers connected to print servers.
To
View the connection status of the wireless network adapter.
View the speed of an active wireless network adapter.
Reduce power consumption when the printer receives no data from the
Ethernet network.
Note: Enable is the factory default setting.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
A value between 1 and 9 is invalid.
Allow the printer to print a banner page.
Note: Off is the factory default setting.
82