Loading Paper; Loading Paper Into Tray 1 - Ricoh SP 221S User Manual

Loading Paper

This section explains how to load paper into the paper tray and the bypass tray.
• When loading paper, take care not to trap or injure your fingers.
For information about supported paper, precautions for storing paper and print areas, see page 50
"Supported Paper".
• When loading paper, be sure to configure the paper size and paper type for the bypass tray and
Tray 1. When printing a document, specify the paper size and paper type and select the paper
tray in the printer driver so that the settings configured when paper is loaded can be used for
printing.

Loading Paper into Tray 1

Extend this tray to load A5 paper vertically or to load paper larger than A4 (297 mm). For details, see
page 38 "Extending Tray 1 to load paper".
1. Pull Tray 1 out slowly, and then remove it using both hands.
Place the tray on a flat surface.
DSH111
Loading Paper
35