Wireless Tab
This function is available for only SP 277SNwX, SP 221SNw, SP 277SFNwX, and SP 221SFNw.
Wireless LAN Status
Item
Wireless LAN Status
MAC Address
Communication Mode
SSID
Wireless Signal Status
Wireless
Wireless LAN Settings
Item
SSID
Communication Mode
Authentication
Encryption
WPA Passphrase
WEP Key Length
WEP Transmit Key ID
WEP Key Format
Displays the status of the connection to the wireless LAN.
Displays the MAC address.
Displays the communication mode that the machine is connecting in.
Displays the SSID of the access point that the machine is connected to.
Displays the strength of the wireless signal that is being received.
Specifies whether or not to use the wireless LAN.
When [Active] is selected, [Wireless LAN Settings] below become
available.
Enter the SSID of the access point.
The SSID can contain up to 32 characters.
When you click [Scan List], a list of available access points is displayed.
You can select the SSID from the list.
[Infrastructure] is selected by default. Therefore, connect the machine to a
wireless router or access point.
Select an authentication method.
Select an encryption method.
If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for
[Authentication], enter the WPA encryption key.
If [WEP] is selected for [Encryption], select 64 bits or 128 bits for the length
of the encryption key.
Select an ID number to identify each WEP key in case multiple WEP
connections are configured.
Select a format for entering the WEP key.
Configuring the Network Settings
Description
Description
221