Configuring The Ipsec Settings; Ipsec Global Settings Tab; Ipsec Policy List Tab - Ricoh SP 221S User Manual

8. Configuring the Machine Using Utilities

Configuring the IPsec Settings

Click [IPsec Settings] to display the page for configuring the IPsec settings.
This page contains the following tabs: [IPsec Global Settings] and [IPsec Policy List].
• This function is available only when an administrator password is specified.

IPsec Global Settings Tab

Item
IPsec Function
Default Policy
Broadcast and
Multicast Bypass
All ICMP Bypass

IPsec Policy List Tab

Item
Name
Address Settings
Action
Status
224
Select whether to enable or disable IPsec.
Select whether to allow for the default IPsec policy.
Select the services that you do not want to apply IPsec from the following:
[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]
Select whether to apply IPsec to ICMP packets (IPv4 and IPv6) from the
following:
[Active]: All ICMP packets will be bypassed without IPsec protection.
"ping" command (echo request and echo reply) is not encapsulated by
IPsec.
[Inactive]: Some ICMP message types will be bypassed without IPsec
protection.
Displays the name of the IPsec policy.
Displays the IP address filter of the IPsec policy as below:
Remote address/Prefix length
Displays the action of the IPsec policy as "Allow", "Drop", or "Require
Security".
Displays the status of the IPsec policy as "Active" or "Inactive".
Description
Description