Specifying The Scan Destination Using The One Touch Buttons Or [Pause/Redial] Key - Ricoh SP 221S User Manual

Specifying the Scan Destination Using the One
Touch Buttons or [Pause/Redial] Key
This section describes how to specify a destination using the following keys:
This function is available for only SP 221SF, SP 277SFNw, and SP 221SFNw.
• One Touch buttons
Use these to specify destinations registered as Quick Dial entries.
• [Pause/Redial] key
Press this to specify the last used destination as the destination for the current job.
Using the One Touch buttons
Press the One Touch button to which the desired Quick Dial entry is registered.
Press the [Shift] key to use the Quick Dial entries Nos. 5 to 8.
Using the [Pause/Redial] key
Press the [Pause/Redial] key to select the last used destination.
• When you specify a scan destination, the machine's scan settings change automatically according
to the information registered for that destination in the Address Book. If necessary, you can change

Specifying the Scan Destination Using the One Touch Buttons or [Pause/Redial] Key

DSH200
DSH151
109