Basic Procedures For Saving Scan Files On A Usb Flash Memory Device - Ricoh SP 221S User Manual

Basic Procedures for Saving Scan Files on a
USB Flash Memory Device
This section explains basic operations of Scan to USB. Files are saved to the USB flash memory device
inserted into the machine.
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• This machine does not support the use of external USB hubs.
• Not all types of USB flash memory devices are supported.
• When using Scan to USB, set [Save Scn Data to USB] to [Active]. For details, see page 187
"Administrator Settings".
1. Insert the USB flash memory device into the USB port.
The scanner screen appears on the display.
A message indicating the machine is reading the device appears. Wait until [Save Scn Data to
USB] appears on the display. The time before the message appears differs depending on the type
of USB flash memory device.
2. Place the original on the exposure glass or in the ADF.
To place the original, see page 56 "Placing Originals".
Specify the scanning settings as necessary. For details of specifying the scanning settings, see
page 123 "Specifying Scan Settings for Scanning".

Basic Procedures for Saving Scan Files on a USB Flash Memory Device

DSH131
111