Specifying Scan Settings For Faxing - Ricoh SP 221S User Manual

6. Sending and Receiving a Fax
8. Replace the handset.
• For details about [Operation], see page 172 "Fax Features Settings".

Specifying Scan Settings for Faxing

Adjusting image density
This section describes how to adjust image density for the current job.
There are three image density levels. The darker the density level, the darker the printout.
1. Press the [Density] key.
2. Press the [ ] or [ ] key to select the desired density level, and then press the [OK] key.
• You can change the machine's default [Density] setting to always scan with a specific density level.
For [Density], see page 172 "Fax Features Settings".
Specifying the resolution
This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
Standard
Select this when the original is a printed or typewritten document with normal-sized characters.
Detail
Select this when the original is a document with small print.
Photo
Select this when the original contains images such as photographs or shaded drawings.
146
DSH153