Accessories; Usage Of External Usb Devices - Strong SRT 8541 Installation Instructions Manual

MENU
Move to

1.4 Accessories

Installation instructions
„ „
1 remote control unit
„ „
2x batteries (AAA type)
„ „
WARNING:

1.5 Usage of external USB devices

It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible
„ „
to USB 2.0 specifications, recording, playback and other multimedia functions of the receiver
might not work properly.*
To ensure best performance of your USB storage device please format it via your receiver
„ „
(through the menu "Multimedia") to FAT32 system. Other file systems are not all supported by
the receiver. However, it is possible to use already NTFS formatted disks.
STRONG cannot guarantee compatibility with all types of USB storage devices.
„ „
If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
„ „
specifications may exceed the supported output of your receiver (max.5 V/800 mA). If so, please
connect your USB HDD to an according external power adapter.
STRONG cannot guarantee the playback of all files although extensions are listed, as it depends
„ „
on codec, data bit rate and resolution used.
It is advised not to store important information on USB storage devices used with the receiver.
„ „
Always make backups of data on your USB storage device before using it with this receiver.
STRONG will not take responsibility for any loss of information or circumstances caused by loss
of information.
* This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed (available in our web shop: www.strong.tv).
Represents a button on the remote control or the receiver.
(Bold characters)
Represents a menu item within a window.
(Italic characters)
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used (e.g. NiMH), we
recommend using types with low self-discharge to ensure long time
operation of your remote control.
5