Technical Specifications - Strong SRT 8541 Installation Instructions Manual

9.0 TECHNICAL SPECIFICATIONS

Demodulator
Demodulator:
Transmission mode:
Tuner
Front End:
Input frequency range:
Input signal level:
Antenna power:
Video Decoder
Video resolutions:
Decoding & Video out:
Aspect ratio:
Conversion:
Audio Decoder
Audio support:
Sampling rate:
Audio mode:
* Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
Multimedia
Video playback:
Audio playback:
Picture view:
* STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on codec, data bit rate
and resolution used.
Connectors
ANT IN - IEC Female
HDMI
TV SCART (RGB, CVBS, Audio L/R)
S/PDIF (coax.)
RJ-45 Ethernet
USB 2.0 port: 5 V/800 mA (peak) supported
General Data
Power supply:
Power consumption:
Power consumption in standby:
26
DVB-T2 (EN 302 755)
normal and extended
DVB-T/T2, UHF Tuner
UHF: 474 ~ 786 MHz
DVB-T2: -70 dBm ~ -25 dBm
5 V DC, max. 100 mA, shortcut protected
576i, 576p, 720p, 1080i, 1080p
PAL
4:3, 16:9
Letterbox, Pan Scan, Combine, Ignore.
Dolby Digital Plus*/AC3+/PCM
MPEG MusiCam Layer II
32, 44.1, 48 KHz
Stereo, Mono
MKV, MPEG-4/H264, HEVC/H265*
MP3, FLAC, OGG*
BMP, JPG*
AC 220 – 240 V ~ 50/60 Hz
7 W (typ.), 12 W (max)
max. 1.0 W