Connection; Connecting To A Terrestrial Antenna; Connecting To Tv With Hdmi Cable; Connecting To Tv With Scart Cable - Strong SRT 8541 Installation Instructions Manual

NOTE:

3.0 CONNECTION

3.1 Connecting to a terrestrial antenna

To receive broadcast signals, your terrestrial indoor or outdoor antenna must be connected to the
ANT IN connector on the back of the receiver. Use a proper shielded antenna cable and suitable
connectors.
NOTE:

3.2 Connecting to TV with HDMI cable

The TV set shall be connected to the receiver using a good quality HDMI cable. This connection gives
the highest possible picture quality.

3.3 Connecting to TV with SCART cable

Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.

3.4 Connecting a USB storage device

This port can be used for USB storage devices such as USB pen drives or HDD with a maximum peak
current of 800 mA. It is recommended to use USB 2.0 storage devices (or higher) for playback of video
files or HD movies.
3.5 Connecting to Ethernet for RSS feeds and weather
forecasts
8
Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver)
and the remote control. Direct sunlight or very bright light can reduce or
disturb the reception of the remote control signals.
If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which
can be pointed towards the transmission tower. Ask your local dealer for
more information. If you are using an active antenna with built-in antenna
amplifier, switch the antenna power to ON in the menu Manual Search.
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 7