Software Update - Strong SRT 8541 Installation Instructions Manual

Inside the menu use pq to highlight the submenu of choice and press OK to enter. Press  to quit
or 9 to go one step back.
7.5.1 IP Settings
This menu allows you to setup or check the Internet connection. The default selection is DHCP set to
On. Normally the setup is done automatically by this. To test if the Internet connection works, select
the item SET and press OK. If successful, a pop-up message box will show up and you can start using
it. If not successful, then check your cable or router. Alternatively set DHCP to Off. Then manually enter
your IP, Gateway and DNS values by using the 0 ~ 9 buttons. Select after entering these values the
item SET and press OK to store and to check.
7.5.2 RSS Feed (Really Simple Syndication)
This menu allows you to choose an RSS news link to read the latest news from different sources.
Use pq to highlight a link of your choice and press OK to enter. Select an item you want to read.
Press  to quit. Also you have option to delete, add or edit an RSS feed of your own choice. Press the
GREEN button Add RSS Feed to open the keyboard. Use pq t u to enter. If you need to use special
symbols press P+/P-. To save the created RSS link, select at the end Save and press OK.
7.5.3 Weather
This menu allows you to watch the weather in your region. Use pq to highlight the menu item
Weather from the Network menu. If you have correct Internet connection then the weather page will
show up with details on screen. Use the YELLOW button City List to open a selection list with main
cities.
Use pq to highlight a major city near you and press OK to select. You can enter a city manually. Press
the GREEN button Change City to open a keyboard. Use pq t u to enter. If you need to use special
symbols, press P+/P-. To save the name, select at the end Save and press OK.

7.6 Software update

This receiver is equipped with different methods to update the software.
It can be used to add new functions, improve functions and to keep the receiver up-to-date.
7.6.1 S/W Upgrade by OTA
The Over-The-Air (OTA) software upgrade function is checking automatically if new a version is
available. If a new version is available then a message box appears on screen. Select OK to start
download and update immediately. Select  if you like to update another time. An OTA update
might not be available in your region. Please visit our website www.strong.tv or contact your local
service hotline for more information about this option.
7.6.2 Upgrade by USB
This feature allows you to update the receiver software via the USB port. When a new software is
available for your receiver, it can be downloaded from our website www.strong.tv.
23